Product Details
-
Details & Dimensions
The uniquely engineered fan blades provide quiet, powerful personal cooling that’s great on a tabletop or mounted to the wall in your home or office. This classic fan is designed with your comfort in mind.
SKU: HT900/HT904/HT900F/HT900G/HT900N
Dimensions: W 8.94″ x H 10.9″ x L 6.3″ -
Manual & FAQs
Question: How do I clean my fan blades?
Answer:
– Unplug the fan before cleaning.
– Lay the gently face down on a flat sturdy surface.
– Locate the screws found on the back grille of the fan.
– Using a Phillips Head screwdriver, loosen each screw by unscrewing each head to the left.
– Once all screws have been loosened, slowly lift the fan into an upright position using the back carrying handle. Do not lift up to quickly as screws may fall out.
– Separate the front grille along the seam where the screws were located.
– Use a damp cloth to wipe the fan grilles and blade.Question: How do I reassemble the fan?
Answer:
– Place the front grille onto the unit, lining up the notch in the grille, with the notch along the bottom of the fan.
– Once the grille is aligned with the body of the fan, and each screw hole matches up, flip the unit to lay it face down on a flat surface.
– Insert each screw into a hole and gently tighten each screw. Ensure that the front grille and the bottom of the fan are tightly secured together.Question:How do I mount the unit to the wall?
Answer:
– Locate and mark the position on the wall where the fan will be mounted (preferably at a wall stud).
– Insert two screws into the wall stud. (Screws are not included and can be purchased at a hardware store)
– Use #8, 1˝ length screws, leave 3/8˝ below screw head (bolt) exposed from the wall.
– Line up the openings on the base of the fan with the screws (bolts) and hang the fan on the wall.For additional FAQ or post-purchase support, please visit our support page.
-
Videos & Support
Reviews
There are no reviews yet.